| Customization: | Available |
|---|---|
| Display: | Digital |
| Installation: | DIN Rail |
|
Still deciding? Get samples of US$ 72.8/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ADW300 wireless meter is mainly used to measure three-phase active power in low-voltage network. It has the functions of RS485 communication and 4G/WiFi/LoRa/LoRaWAN/Ethernet wireless communication. It is convenient for users to monitor, collect and manage electricity. It can be flexibly installed in the distribution box to realize the measurement, statistics and analysis of individual electric energy in different regions and loads.
|
ADW300
|
Technical Parameter
|
|
|
Voltage Input
|
Rated Voltage
|
3*57.7/100V, 3*220/380V, 3*380/660V, 3*100V, 3*380V, 3*660V
|
|
Reference Frequency
|
50Hz
|
|
|
Power Waste
|
Each Phase < 0.5VA
|
|
|
Current Input
|
Input Current
|
3*1(6)A; 3*1(6)A (ADW300W), 3*20(100)A (ADW300W)
|
|
Start Current
|
1‰lb (Class 0.5S), 4‰lb (Class 1)
|
|
|
Power Waste
|
Each Phase < 1VA
|
|
|
Auxiliary Power Supply
|
Supply Voltage
|
AC 85-265V, AC 380V, DC 24V
|
|
Power Waste
|
<2W
|
|
|
Active Energy Accuracy
|
Class 0.5S (ADW300), Class 1(ADW300W)
|
|
|
Temperature Accuracy
|
±2ºC
|
|
|
Pulse
|
Pulse Width
|
80±20ms
|
|
Impulse Constant
|
3*20(100)A: 400imp/kWh, 3*1(6)A: 6400imp/kWh
|
|
|
Communication
|
Wireless
|
Transmission on 470MHz and Maximum Distance in Open Space is 1 km; LR; NB; 4GHW; WF
|
|
Infrared Communication
|
The Constant Baud is 1200
|
|
|
Interface
|
RS485 (A,B)
|
|
|
Connection Mode
|
Shielded Twisted Pair Conductors
|
|
|
Protocol
|
Modbus-RTU, DL/T 645-07
|
|
|
Temperature Range
|
Operating
|
-10-45ºC
|
|
Storage
|
-40-70ºC
|
|
|
Humidity
|
≤95% (No Condensation)
|
|
|
Altitude
|
≤95% (No Condensation)
|
|
|
Function
|
Function Description
|
|
Dsiplay
|
LCD (Field Form), 8 digits
|
|
Electric Energy Metering
|
Active Power Metering (Positive and Reverse); Four Quadrant Reactive Power
|
|
Electricity Measurement
|
U, I, P, Q, S, PF, Hz
|
|
Harmonic Function
|
Total Harmonic Content and Fractional Harmonic Content (2-31 times)
|
|
Pulse Output
|
Active Power Pulse Output
|
|
Three Phase Unbalance
|
Voltage and Current Imbalance
|
|
Temperature Measurement Function
|
A, B, C, N Four Way Temparature Measurement (Optional T)
|
|
DI/DO
|
4DI/2DO (Optional K), 2DI/2DO (Optional U)
|
|
Residual Current
|
1 Way Residual Current Measurement
|
|
LED Instruction
|
Pulse and Other Indication
|
|
External CT
|
External Open Type CT (Selection of W)
|
|
Electrical Parametric Alarm
|
Under Voltage, Over Voltage, Under Current, Over Current, Under Load, Over Load, etc.
|
|
Communication
|
Infrared Communication
|
|
RS485 (Optional C)
|
|
|
LoRa (Optional LR)
|
|
|
NB-IoT (Optional NB)
|
|
|
4G (Optional 4GHW)
|
|
|
WiFi (Optional WF)
|
Application for Home Energy StorageApplication for Commercial Energy Storage
Q:What's the biggest advantage of ADW300?
A:ADW300 has its built-in wireless communication module which allow it to realize 4G LTE, WiFi, NB-IoT, LoRa upstream communication without using extra IoT gateways. For the application scenarios when the meters can't be of centralized installation, ADW300 will usually be the best option for monitor 3-phase circuits that were far from each other.
Q:How should I deal with RS485 network communication malfunction?
A:First, check if the wiring of RS485 communication line was loosen or wired incorrectly.(like reversely wiring the A,B terminal).
Next,inspect if the meter's setting of address, baud rate, check bit was correct by using keypads on the meter.
Q:What if LoRa communication of meters malfunctioned?
A:First, use USB to RS485 serial converter to connect the meter with computer. Then use adjustment software to check if setting of meter is on consensus with the setting of master station.(setting of channel and spreading factor--SF)
If setting remain the same, then it might be due to large interference of work site or the excessively far range between meter and host. In that case, it's recommended to use chuck antenna or set a new master station nearby.
Q:What's the difference between ADW300 and ADW300W
A:ADW300 has internal current transformers and can select compatible current transformer according to the site current to realized a secondary connection via CTs.
ADW300W on the other hand, has external current transformers.(non-detachable or it will damage the meter) This kind of design extremely ease the wiring and installation if the work-site already has CTs.
Q:What do 3×57.7/100V,3×220/380V,3×380/660V,3×100V,3×380V,3×660V represent respectively?
A:The meter's spec of 3*100V,3*57.7/100V is suitable for high voltage power system while pairing with PT(potential transformer or voltage transformer). Beside, 3*100V represent 3-phase 3-wire and 3*57.7/100V represent 3-phase 4-wire.
The meter's spec of 3*220/380V,3*380/660V,3*380V,3*660V is suitable for low voltage power system(directly connect with meter). Meanwhile,3*380V,3*660V represent 3-phase 3-wire and 3*220/380V,3*380/660V represent 3-phase 4-wire.
Other Question? Please contact us and we will get back to you as soon as possible.
){kind=link}