Acrel 35mm DIN Rail 120A Cts Paired Bi-Directional 230VAC Solar PV Single Phase Electricity Meter RS485 Modbus-RTU

• Customization: Available
• Warranty: 2 Years
• Display: Indicator
• Model NO.: ACR10R-D16TE
• Power Meter Connection: Terminal
• Measured Signal: Continuous Wave
• Type: Energy Meter
• Certification: ISO, CE
• Customized: Customized
• Communication: RS485 Modbus-RTU
• Frequency: 45~60Hz
• Measurement: U,I,P,Q,S,PF,F
• Power Consumption: Less Then 0.2va
• Voltage: 220V~264V
• Transport Package: Carton
• Specification: single phase solar energy meter
• Trademark: Acrel
• Origin: China

Product Description

 

ACR10R Bidirectional Single-phase Solar Pv Energy Meter with External CT

(Note: The meter can match to Solis Inverter to solar power zero export, if it is used for the Solis Inverter)

Product Description

 

Measurement: 1-phase Active Power, Reactive Power, Current, Voltage and etc 15 Kwp available Current Rating: Diameter 10mm,80A (paired with external CTs) Diameter 16mm,120A (paired with external CTs) Diameter 24mm,200A (paired with external CTs) Diameter 36mm,300A (paired with external CTs)  Communication: RS485 (MODBUS-RTU)  Application: Using distributed Solar PV and Anti-reflux Inverter  Display: LCD Display  Installation: 35mm DIN Rail  Power Supply: 85~265V AC or 100~350V DC  Standard&Certificate: CE

Single phase LCD din rail energy meter with 36mm split CT enabled cable 300A input. It is suitable for power monitoring of grid-connected PV power stations, power management, and so on. It is easy to install without removing the primary bus bar and is cost-effective. It can measure current, voltage, active power, reactive power, frequency, power factor, and so on. It supports multi-tariff energy metering, 4-quadrant energy metering, and so on.

 

Detailed Photos

 

Features

	Used for distributed Solar PV Reflux Monitoring
	Bidirectional Metering  Active Energy Metering  Reactive Energy Metering
	RS485 Communication  MODBUS-RTU Protocol  Communicate with Inverter to realize anti-reflux Function

 

	Single-phase Two-Wire Connection  Paired with external split core CT  Rated Voltage: AC 100V, 400V
	LCD Display  Parameter Display  Programming Interface
	Keypads HMI for Programming  Parameter Display Setting  Communication(address, baud rate and etc.)

 

Product Parameters

 

Technical parameters		Indicators
Input	Grid	Single-phase
	Frequency	45~65Hz
	Voltage	Rated voltage: AC 100V, 400V
		Overload: 1.2 times the rated voltage(continuous); 2 times the rated voltage lasting for 1 second
		Power consumption: less than 0.2VA
	Current	Rated current: 10A,20A,40A,80A,120A,200A etc. (for details see product specifications)
		Overload: 1.2 times the rated current(continuous);10 times the rated current lasting for 1 second
		Power consumption: less than 0.2VA
Output	Communication	RS485 interface, Modbus-RTU
	Display	LCD
Measurement precision		Voltage: 0.2 level, current, power Active energy: 0.5 level,0.01Hz frequency, Reactive energy: 1 level
Power supply		AC85~265V or DC100~350V; power consumption ≤10VA
Safety	Power frequency withstands voltage	AC2kV 1 min between power supply // current input//voltage input and communication AC2kV 1 min between each pair of combinations among power supply, current input, and voltage input.
	Insulating resistor	Input, output terminal to housing >100MΩ
Environment		Working temperature: -10ºC~+55ºC;storage temperature: -20ºC~+70ºC Relative humidity:5%~95%,non-condensing; altitude:≤2500m

 

Wiring Chart

Dimension

 

Solution

 

Company Profile