Customization: | Available |
---|---|
Warranty: | 2 Years |
Display: | LCD Display |
Still deciding? Get samples of US$ 24/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Multi-rate: 4 Tariff Rates and etc
ADL200 single-phase electronic watt-hour meter is mainly used to measure single-phase active energy in low-voltage networks. It can also measure voltage, current, power and other electricity. It can also be equipped with RS485 communication function to facilitate users to monitor, collect and manage electricity consumption. It can be flexibly installed in the distribution box to realize the sub-item electric energy measurement, statistics and analysis of different areas and different loads. The product meets the requirements of the national standard GB/T17215.321-2008 and the enterprise standard Q31/0114000129C035-2017 "Enterprise Standard for Rail Mounted Electric Energy Meters".
|
Diverse Electricity Parameters Measurement U (Voltage) I (Current) P (Power) Q (Reactive power) S (Apparent power) PF (Power factor) kWh (Kilowatt-hours) kVarh (Kilovar-hours) |
|
Multi-rate/Flexible Tariff 4 Time zone 4 Tariff rate (Spike, Peak, Flat, Valley) 2 Time period list 14 Time period by day |
|
HMI for Parameters Setting Code Protocol Address Baud rate Parity All Display |
Input voltage
|
Reference voltage
|
AC 220V
|
Reference frequency
|
50Hz
|
|
Power consumption
|
<10VA
|
|
Input current
|
Basic current
|
10A
|
Maximum current
|
80A
|
|
Starting current
|
4‰Ib
|
|
Consumption
|
<4VA
|
|
Measurement performance
|
Accuracy of measuring
|
1 class
|
Range of measuring
|
000000.00~99999999kWh
|
|
Clock accuracy
|
Error≤0.5s/d
|
|
Active pulse
|
Pulse width
|
80±20ms
|
Pulse constant
|
1000imp/kWh
|
|
Communicati on
|
Interface
|
RS485(A+,B-)
|
Connection mode
|
Shielded twisted pair conductors
|
|
Protocol
|
MODBUS-RTU
|
Temperature range
|
Work temperature
|
-25ºC~55ºC
|
Storage Temperature
|
-40ºC~70ºC
|
|
Relative humidity
|
≤95%(No condensation)
|
|
Altitude
|
<2000m
|
PIN/Terminal Overview of ADL200
Power Wiring: 1-phase 2-wire via direct connect
Communication Wiring: RS485 wired Communication with IoT Gateway