Acrel Amc16z-Ka a+B Independent 2-Way Single Side Each 24-Way Active Switch Status Applied to Data Centers, Precision Power Distribution Cabinets

Product Description

Product Description

AMC16Z series AC precision power distribution monitoring device is specially designed for data center server power management.The device designed exquisite, can provide A + B 2 incoming and 96 outgoing's electrical parameters, the input and output switch and the state of lightning protection device with real-time monitoring. All alarm threshold of measurement channels can be set in separate. Over-outgoing triggers system acoustooptic warning immediately. Highly integrated monitoring loop is realized in the volume of traditional instruments.

Product Parameters

Type Model	Function description
AMC16Z-ZA	Monitor the full power parameters of A+B double-way three-phase AC incoming circuit, 6-way switch state monitoring, 2-way alarm output, 2-way leakage monitoring, 1-way temperature and humidity detection, 1-way RS485 communication, and phase-sequence detection.
AMC16Z-FA	Monitor the full power parameters of 24 branches of A+B double-way AC outgoing line, 1-way RS485 communication and phase adjustment.
AMC16Z-KA	Wet contact, monitoring A+B total 48 branch switch state, 1-way RS485 communication.
AMC16Z-KD	Dry contact, monitoring A+B total 48 branch switch state, 1-way RS485 communication.
AMC16Z-FAK24	Monitor the full power parameters and switch state of 24 branches of A+B double- way AC outgoing line, 1-way RS485 communication and phase adjustment.
AMC16Z-FAK48	Monitor the full power parameters and switch state of 48 branches of A+B double- way AC outgoing line, 1-way RS485 communication and phase adjustment.
AMC16Z-FDK24	Monitor the full power parameters and switch state of 24 branches of A+B double-way DC outgoing line, 1-way RS485 communication and phase adjustment.
AMC16Z-FDK48	Monitor the full power parameters and switch state of 48 branches of A+B double-way DC outgoing line, 1-way RS485 communication and phase adjustment.

Function	Description
Measurement (Common)	Three-phase AC kWh, kVarh, Active Power, Reactive Power, Current, Voltage, Power Factor, Apparent Power, Frequency, Zero ground voltage, neutral line current
Measurement (Power Quality)	total harmonic content (THD), 2-63 harmonics, current and voltage unbalance degree, current K coefficient (KF), voltage crest coefficient (CF), telephone waveform factor (THFF), peak voltage, voltage and current sequence quantity
Temp.&Humidity Monitoring	Temperature Monitoring Range: -40ºC~+99ºC Humidity Monitoring Range: 20%~90%
Leakage Current	2-channel Leakage Current Measurement
Accuracy	Electrical Parameter Metering Accuracy: Voltage/current level 0.2, active power/electric energy level 0.5, reactive power/electric energy level 1 Temperature Metering Accuracy: ±1ºC; Temperature Metering Accuracy: ±5%
Communication	RS485 Interface (MODBUS-RTU protocol)
DO (Switch Output)	2-channel DO (Digital Output); 3A 250VAC/3A 30VDC
DI (Switch Input)	6-channel DI (Digital Input); dry contact

Parameter	Description&Value
Voltage Input	Rated Voltage	3x220~264Vac L-N
	Reference Frequency	45~65Hz
Current Input	Rated Current	3x1(6)A AC (via CTs)
Power Supply	Source from	Voltage Input (Voltage signal input for both measurement and power supply)
Installation	DIN-rail	35mm standard DIN-rail Installation
Phase Wiring	3P4W	3-phase 4-wire
Safety	Insulation	All terminals and the insulation resistance between the conductive pieces not less than 100MΩ
	Withstand voltage	A-way voltage and current signal, B-way voltage and current signal, switch output and other ports should meet AC2kV 1min in pairs, the switch input and other ports should meet ac0.5kv 1mim, leakage current should be less than 2mA, no breakdown or flashover

Condition	Description&Value
Temperature	Operating Temperature: -20ºC~+55ºC; Storage Temperature: -40°C ~+70°C
Humidity	≤95%RH, no condensation, without corrosive gas
Altitude	≤ 2000m

Installation Instructions

Certifications