Acrel Can Connect to 8 Three-Phase AC Circuits at The Same Time Power Collection and Monitoring Device LCD Display Amc200L-8e3

Product Description

Product Description

AMC200(L) DC multi-circuit intelligent power acquisition and monitoring device is mainly used for the full 
electrical parameter measurement of multiple circuits, and can be connected to the current input of up to 12 single-phase 
DC circuits at the same time. It can directly measure parameters such as voltage, current and power.
 

Product Parameters

Technical Parameter		Technical Indicator
Input	DC Voltage	One channel:DC -48V
	DC Current	12 Channels Hall Current Sensor:Hall sensor secondary side DC 5V access
	State Grid Monitoring	One channel:DC 0-5V
	Overload	Voltage: 1.2 times for 1 second, 2 times for 1 second; Current: 1.2 times for 1 second, 10 times for 1 second
Frequency		Voltage,Current Class 0.5,Power Class 1.0
Resolution		The voltage output accuracy is 0.01V, the current output accuracy is 0.01A, the power output accuracy is 0.01kW, and the power output accuracy is 0.01kWh
Function	Basic Function	Monitoring equipment system time, total voltage, total output current, total power, total electrical energy, voltage of each sub channel, current of each sub channel, power of each sub channel, electrical energy of each sub channel; RS485 communication
	Alarm Function	DC voltage output too low alarm, DC voltage output too high alarm, one-time power-off alarm, module voltage loss alarm, metering sub channel error alarm, internal program error alarm, clock error alarm, memory unit failure alarm, AC input power failure alarm
	Timing function	Support broadcast timing, remote timing calibration of metering module can be carried out through RS485 communication interface
	Communication	Single-channel RS485, the default baud rate is 9600bps, and can be set to 1200-9600bps. Communication protocol: YD/T1363 protocol or Modbus RTU protocol
	Hall power supply	A set of ±12V power output
	Humidity And Temperature	4 Channels NTC Temperature Monitoring:Temperature:-20-100ºC (Accuracy±2ºC) Humidity:20-90%RH(Accuracy ±5%RH)
Auxiliary power	Voltage Range	DC -40V~-60V
	Power consumption	The whole device≤2W (without Hall power supply output)
Storage		It has the storage function of historical energy data and historical alarm information
Insulation resistance		≥40MΩ
Environment	Temperature	Working Temperature:-20ºC~+60ºC;Storage Temperature:-40ºC~+70ºC
Humidity		≤98% no condensation, no corrosive gas place
Altitude		≤4000m