Ahkc-F Close Loop Hall Current Sensor 0~1000A Input 4/5V Output

• Customization: Available
• Certification: CE
• Customized: Customized
• Model NO.: AHKC-F
• Input: 0~(200-1000)a
• Output: 5V/4V
• Measuring Aperture: 43*13mm
• Power Supply: ±15V
• Usage: Magnetic Sensor/Analog Sensor
• Theory: Hall Sensor
• Transport Package: Carton
• Specification: 73.5*56.5*22.5mm
• Trademark: Acrel
• Origin: China
• Production Capacity: 10000 Piece/Pieces Per Month

Product Description

1 Introduction
Hall current sensor is mainly used for isolated conversion of complex signals such as AC, DC and pulse.Through the principle of hall effect, the transformed signal can be directly collected and accepted by AD, DSP, PLC, secondary instrument and other devices.Hall current sensors are widely applicable for acquisition and feeback control of current signals in the current monitoring,inverter,solar power management,current cabinet,DC motor drive and UPS servo control systems.It has the advantages of fast response time, wide range of current measurement, high accuracy, strong overload ability, good linearity and strong anti-interference ability.

 
close loop ac dc hall current sensor hall effect current transducer 0~1000A input  4/5V output 15v power supply AHKC-F is an open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. 


2 Parameters




3.Product

Parameters	Indicators
Rated input current	±20~±800A
Rated input voltage	±5V/±4V
Accuracy	1.0
Power supply	DC±15V(Allow the volatility±20%)
Zero offset voltage	±20mV
Offset voltage drift	≤±1.0mV/ºC
Linearity	≤0.2%FS
Response time	≤5us
Frequency	0~20kHz
Insulation voltage	2.5kV/50Hz/1min
Working temperature	-40ºC~85ºC
Storage temperature	-40ºC~85ºC
Power consumption	≤0.5W